The Tormek T4 is a high quality and compact sharpening machine, ideal for home and hobby work as well as professional use. You get access to the extensive Tormek jig system and can sharpen all the common edge tools with highest precision.

On top of the T-4, this promotion also comes with the KJ-45 Centring knife sharpening jig and the SVM-00 Holder for small knives.

Water cooled sharpening

Tormek T-4 is an enhancement of the T-3 model taking the precision and stability to a completely new level. Vital functions like the motor and the main shaft are mounted in the zinc cast top, which also includes integrated sleeves for the Universal Support. This advanced design ensures an unbeatable precision for the Universal Support, which control all jigs and accessories.

Grinding wheel for both coarse and fine sharpening

Like the larger Tormek models, the T-4 is equipped with the Tormek Original Grindstone (⌀ 200 mm). It is optimized to combine efficient steel removal, smooth surface finish and a long life. With the included Stone Grader, you can alter the stone surface from 220 grit to about a 1000 grit surface, giving you two different sharpening qualities in one stone.

Sharpen chisels, knives, scissors, carving tools and more

The T-4 is well suited for sharpening chisels, knives, scissors, and smaller tools like carving tools. It also works with turning tools and drill bits, but for plane irons and moulding knives we recommend one of the larger Tormek machine models. Note that a few shapes of gouges cannot be honed with the SVD-186R Gouge Jig on the leather honing wheel due to the compact size of the Tormek T-4. These tools can be honed freehand instead.

The motor is rated for 30-minutes continuous use at a time. That is usually more than enough for the house need, but if you sharpen more we advise you to take a look at Tormek T-8 which can run continuously.

Included with the Tormek T-4:
The SP-650 Stone Grader to change the grit of your stone. The WM-200 AngleMaster to measure the edge angle. The PA-70 Honing Compound to use with the Leather Honing Wheel. The Tormek Handbook on sharpening.
Configure the Tormek T-4 with your choice of grinding jigs according to the tools that you are to sharpen (sold separately).

Tormek T-4 details
With the sleeves for the Universal Support now being cast in the zinc top, together with the new Tormek stadium shaped design of the holes (patent pending) – the precision has been improved by 300 % compared to T-3.
The handle makes the machine easy to move and position. So you are not tempted to make the mistake and try to lift the machine with the Universal Support.
Vital parts like the motor and the main shaft are integrated with the zinc cast top.
The machine plate is now made of metal, which makes it a convenient place to store the Tormek AngleMaster (which has magnetic feet).