Spurs are made from premium carbon steel - they are made to last. The points are held in the body with a set screw so the length which the point protrudes from the body can be set by the turner.
What this means is the point has a spring behind it so you will always achieve a positive connection with the piece you are turning. Not only that, you have complete control over the amount of tension in the spring by adjusting the screw in the bottom! The set screw in the side prevents the point from being ejected due to the tension in the spring.
Oneway spurs have four aggressive teeth which bite into wood blanks.
Oneway Spurs are available to mount directly into the Stronghold, ONEWAY, and Talon Chucks. Because of this direct mounting capability, it is not necessary to remove the Chuck from your lathe to do spindle work.
Just open the jaws, insert the Chuck Spur and you're ready to turn spindles within seconds!
Diameter: 13 mm
Length: 76 mm
Properties
- OSD13
- Oneway
- 2022020012212
