Transparent resin art epoxy casting resin

Are you looking for a transparent epoxy resin to finish your scaffold wooden furniture? 
This transparent epoxy resin is of high quality. The transparent resin consists of two components and is a solvent-free, odourless and crystal clear casting resin based on epoxy. The transparent resin also has a high UV resistance and can be coloured with PU pigments or opaque with epoxy dyes. Furthermore, it is suitable to combine with glow in the dark powders.

Processing

Mix both components in a 100/45 parts by weight ratio. Potlife: 60 min. Thin layers react slower. Dry after 24 hours at a temperature of 23°C. Fully cured after 7 days. If necessary, apply a first layer as contact layer and let it dry for +/- 1 hour. You can then apply the next layer. The epoxy can be applied with a brush or poured out and spread with a plastic spatula. The epoxy Clear fast can be poured in one go up to a thickness of 8 mm. Make small quantities at a time, this in function of the processing time. If you wish to use a burner to remove the air bubbles, always wear a suitable filter mask.

Transparent epoxy resin for your project

The casting resin in our assortment is extremely suitable for casting thin layers. For example, for casting scaffolding wood or river tables. But it can also be used for casting art resin. It is also suitable for casting on, among others: Wood Cardboard, Metal & Plastic.

Application

Casting of glosscoat on wood, carton, metal or plastic. Good UV resistance and can be coloured with PU pigments or epoxy pigments.

This should be applied directly to the wood. If the wood was treated with a sealer first, this may produce poor results.

Safety

Always wear suitable protective clothing and gloves. Avoid long term skin contact.

Both bottles can be closed in case you have leftovers.

If the hardener starts to crystallise, you need to filter out those crystals before you can continue using the epoxy.