This Robert Sorby 4 mm Spiralling Cutter is a multi-toothed cutter designed to allow the user to create a variety of spiral patterns and textures with a rib size of 4 mm on bowl and spindle projects. One of a family of five cutters for the large texturing and spiralling tools. Experiment using the various pitch depths these cutters provide. With a bit of practice you’ll be amazed at the results.
Sharpening: Use a diamond file or honing stone on both bevelled faces. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Sharpening can be done with the cutter mounted on the tool.
This cutter is designed for use with the following tools:
Spiralling Tool (320H, 320S, 330H, 330S)
Texturing Tool (310H, 310S)
Properties
- RS350/4
- Robert Sorby
- 5013035025837
