Varnish oil combines the best properties of varnish and oil. Varnish oil penetrates deep into the wood and protects both from the inside and outside. Varnish oil gives excellent protection and a beautiful convex sheen. The surface is abrasion-resistant and permanently elastic, so the layer does not flake off and is easy to maintain.

Varnish oil can be used both indoors and outdoors and is (sea) water resistant so that it can also be used on ships.

Varnish Oil Primer serves as a base coat for a complete Varnish Oil finish and should be finished with Varnish Oil Top Coat.

The main ingredients of Varnish Oil Primer are:

• Tung oil
• Linseed oil
• Dehydrated Castor oil
• Drying agent (lead-free and cobalt-free)
• This product contains no solvents

Here's how to apply this Varnish Oil Primer:

• Apply a thin layer of Varnish Oil Primer to the surface using a block witter, a flat brush, a patent brush or a roller.
• Treat knotty wood, cracks and the like carefully.
• Where the oil is easily absorbed, apply an additional coat immediately (wet in wet).
• Allow to penetrate for approx. 30 minutes, depending on temperature. Shorter in warm weather, longer in cooler weather.
• After this time, but in any case before the oil begins to dry, wipe off any excess oil with clean, dry cloths so that no oil remains on the surface. If the excess oil is removed too late or not thoroughly enough, this can result in a slow-drying layer that starts to wrinkle and stick.
• If desired, Varnish Oil Primer can be sanded down while the oil is still wet by sanding the surface with waterproof sandpaper 240-grit paper in order to fill the pores faster and obtain a smoother surface.
• Allow to dry for at least 24 hours. In cool weather, preferably longer.
• Repeat the treatment until the surface is completely saturated and thus no longer absorbs primer.
• Finish further with Varnish Oil Deklak until the desired protection is obtained.

Tips:

• Remove excess oil promptly and thoroughly to avoid problems.
• Allow used cloths to dry spread out to prevent scalding.
• Don't use all the oil at once? Then order Stoploss bags to keep the oil in good condition.