The RS200KT is the most universal and versatile hollowing chisel on the market. The cutting blade carrier is made of a round bar, to which a flat side has been ground along its entire length. The two HSS cutters supplied can be clamped in any position, which makes this chisel particularly useful for hollowing out boxes with a small opening. During hollowing, the chisel rests with the flat side on the chisel support. This makes it much easier to control and direct. After hollowing, the supplied scraper blade is used for finishing. This chisel can equally well be used as an ordinary scraper, with the flat side of the cutting blade carrier resting on the chisel support, or as a shaving scraper (scraping blade at 45°), with the round side of the cutting blade carrier resting on the chisel support.
Four additional cutters are available for making perfect, semi-circular shapes: 6 and 12 mm convex, 6 and 12 mm concave, 10 and 16 mm convex and 10 and 16 mm concave. The respective convex and concave shapes fit together perfectly. These cutters are particularly useful for making wheels, for example.
Properties
- SOV-RS200
- Robert Sorby
- 5013035042070
Links & downloads
